Carpenter
Company: Advancia Technologies, LLC
Location: Renton
Posted on: January 9, 2021
|
|
Job Description:
Journeyman Carpenter Location: Renton, WA Reports To: Project
Superintendent or designee Employment Status: Full-time FLSA
Status: Non-exempt Hourly Pay: Davis Bacon Wages + Fringe Rate
Position Summary: Advancia Technologies, LLC is seeking a qualified
Journeyman Carpenter who will be primarily based in Renton, WA; may
require travel to remote areas in and out of the state, and will
report to the corresponding Project Superintendent or designee.
Performs tasks involving physical labor indoors and outdoors
including movement of material, equipment and parts between
production areas, operating hand/power tools of all types including
air hammers, surveying and measuring equipment, and a variety of
other equipment and instruments. May clean and prepare sites, dig
trenches, set braces to support the sides of excavations, erect
scaffolding, clean-up rubble and debris. May assist other craft
workers. Essential Duties and Responsibilities : (including but not
limited to) General manual labor Finish carpentry work at a
journeyman level Signal equipment operators to facilitate
alignment, movement, and adjustment of machinery, equipment, and
materials. Spray materials such as water, sand, steam, vinyl,
paint, or stucco through hoses to clean, coat, or seal surfaces.
Tend machines that pump concrete, grout, cement, sand, plaster, or
stucco through spray guns for application to ceilings and walls.
Tend pumps, compressors, and generators to provide power for tools,
machinery, and equipment, or to heat and move materials such as
asphalt. Lubricate, clean, and repair machinery, equipment, and
tools. Build and position forms for pouring concrete and dismantle
forms after use using saws, hammers, nails, or bolts. Clean and
prepare construction sites to eliminate possible hazards. Control
traffic passing near, in, and around work zones. Dig
ditches/trenches, backfill excavations, and compact/level earth to
grade specifications using picks, shovels, pneumatic tampers, and
rakes. Erect and disassemble scaffolding, shoring, braces, traffic
barricades, ramps, and other temporary structures. Load, unload,
and identify building materials, machinery, and tools, and
distribute them to the appropriate locations according to project
plans/specifications. Measure, mark, and record openings and
distances where construction work will be performed. Raze buildings
and salvage useful materials. Demo various Architectural finishes,
such as, but not limited to carpeting, ceiling tile, drywall, etc.
Patch, repair and install various Architectural finishes, such as,
but not limited to carpeting, ceiling tile, drywall, etc. May
supervise, or escort other workers or subcontractors and ensure
that safe work practices are employed at all times Read and
interpret plans, instructions, and specifications to determine work
activities. Perform any other duties as assigned by management.
Minimum Qualifications: Ten (10) years of experience as Journeyman
Carpenter Experienced in commercial building construction Knowledge
of construction machines and tools; includes their designs, uses,
repair and maintenance, and the practical application of use Valid
driver's license and clean driving record, ability to operate
company vehicles and provide personal vehicle insurance Ability to
pass a pre-employment background check and drug screening Ability
to pass a fit for duty test Ability to pass background check for
Federal Agency to obtain security access badging Candidates must be
a United States Citizen or Permanent Resident Knowledge of
principles and practices of safety management. Ability to
communicate clearly and concisely, both orally and in writing.
Ability to maintain effective working relationships with a
diversified group of people under sometimes trying and stressful
conditions. Ability to analyze, evaluate, and recommend sound
solutions to problems of routine nature. Ability to work
independently and efficiently Preferred Qualifications: High School
Graduate or General Education Degree (GED) preferred. Technical
school in art of carpentry OSHA 10 Training Certificate preferred
Core Competencies: Self-Motivated - Ability to be internally
inspired to perform a task to the best of one's ability using his
or her own drive or initiative. Communication - Ability to
communicate effectively with others using the spoken and written
word. Time Management - Ability to utilize the available time to
organize and complete work within given deadlines. Working
Environment: May be indoors or outdoors, subject to confined
spaces, changes in temperature, weather conditions, and noise
levels. Physical Demands (including but not limited to): Frequent
lifting, sitting, standing, stooping for prolonged periods of time,
using hands/fingers requiring dexterity, should have good hand-eye
coordination and motion control in coordination with handling
tools, equipment and other related components Reaching with hands
and arms for items above and below sight level, talking, hearing,
and seeing (up close, at a distance, along the periphery, with
depth, color perception, and the ability to adjust focus); walking
from place to place within the project location with occasional use
of stairs and no elevator available; bending, pushing, pulling, and
standing for up to 12 hours. Frequent lifting of up to 50 pounds
such as small electrical components, equipment and other materials
[Reasonable accommodations may be made to enable individuals with
disabilities to perform the essential functions]. Travel : Local
travel will be needed regularly Domestic travel may be needed If
interested, or for more information, pls. contact : Kjersti Parker
Advancia Technologies, LLC is committed to hiring and retaining a
diverse workforce. We are proud to be an Equal
Opportunity/Affirmative Action-Employer, making decisions without
regard to race, color, religion, creed, sex, sexual orientation
gender identity, marital status, national origin, age, veteran
status, disability or any other protected class. Employment Type:
Full Time Years Experience: 10 - 15 years Bonus/Commission: No
Keywords: Advancia Technologies, LLC, Renton , Carpenter, Professions , Renton, Washington
Click
here to apply!
|
Didn't find what you're looking for? Search again!
Other Professions JobsNow Hiring CDL Flatbed Truck Drivers for Regional Routes Description: Now Hiring Flatbed Regional CDL Truck Drivers Do you have a CDL-A If you are looking for big company resources with a small company feel, you have found the right place to call home. Drive for System (more...) Company: System Transport Location: Redmond Posted on: 01/20/2021 Local Shuttle CDL-A Truck Drivers Description: Ambassadors Wanted: Get Home Daily With Local Opportunities Call 866 693-4517 or Apply Online Below Looking for the stability and security of running with a private fleet Join the Ashley Distribution (more...) Company: Ashley Distribution Location: Redmond Posted on: 01/20/2021 Service Technician, Refrigeration and Appliance Repair Description: Req/Job ID: 1000203BREmploying Entity: Transform SR LLCEmployment Category: Regular, Full-timeJob Function: Repair/InstallationStore ID: 28040: IH-Spokane WAA sign on bonus up to 5000 may apply to qualified (more...) Company: Sears Home Services Location: Olympia Posted on: 01/20/2021 CDL-A Lease Purchase Truck Driver - $1.00-MILE BASE PAY! Description: Call Today to Learn More About Our NO CASH DOWN Lease Purchase Program for Solos John Christner Trucking is moving critical fresh food loads to restock shelves and need hard working professionals like (more...) Company: John Christner Trucking Location: Olympia Posted on: 01/20/2021 Class A CDL - Team Truck Driver Description: Job DescriptionTeam truck driver compensation is among the highest in Schneider's fleet. Earn up to 0.51 per mile starting pay and average 5500 miles per week with choice to run more or less and 1100 (more...) Company: Schneider Location: Olympia Posted on: 01/20/2021 CDL-A Regional Driver - Western - 1 yr OTR EXP required Description: Opportunities Available for Regional Company Drivers Benefits ul li BASE PAY 44 /MI BONUSES ACCESSORIAL PAY AVERAGE OF 60 /MILE REGARDLESS OF HIRE DATE OR EXPERIENCE li Great Miles li (more...) Company: Soar Transportation Group Location: Olympia Posted on: 01/20/2021 Class A CDL Route Driver - Domiciled in Spokane, WA - DRI01016K Description: ABOUT MEDTRANS br br MedTrans is Medline Industries' own national transportation fleet consisting of 600 trucks that deliver our lifesaving products day in and day out. Our fleet consists of newer (more...) Company: Medline Industries, Inc. Location: Lacey Posted on: 01/20/2021 CDL-A Owner Operator Truck Driver - $1.00-MILE BASE PAY! Description: Solo Owner Operators Earn 1.00 Per Mile Base Pay John Christner Trucking is moving critical fresh food loads to restock shelves and need hard working professionals like you. We are all in this together. (more...) Company: John Christner Trucking Location: Olympia Posted on: 01/20/2021 CLASS A CDL - OTR COMPANY TRUCK DRIVER - OUTSTANDING BENEFITS! (Kirkla Description: OVER THE ROAD CLASS A CDL COMPANY TRUCK DRIVER Major Pay Increases in the First Year OTR - CDL A Truck Drivers are the backbone of May Trucking Company. We never forget that our success as an organization (more...) Company: May Trucking Location: Kirkland Posted on: 01/20/2021 Hiring Experienced CDL Truck Drivers for Regional Routes Description: Now Hiring Flatbed Regional CDL Truck Drivers Do you have a CDL-A If you are looking for big company resources with a small company feel, you have found the right place to call home. Drive for System (more...) Company: System Transport Location: Redmond Posted on: 01/20/2021 |